Chemicals can be toxic, volatile, or highly corrosive in nature which makes them considerably dangerous. They can affect your health, pollute our food chain and the environment, and, in case of a serious injury, cause litigation issues. In the case of industrial premises, these dangers put a lot of responsibility on the staff to keep plant equipment and procedures safe and reliable.

Chemical Resistant Pumps are designed to smoothly move potentially corrosive fluids such as wastewater drainage, acids, slurries, and other various chemicals that normal pumps cannot handle. These chemical pumps are built to be corrosion-resistant to minimize repair and replacement costs.

Read on to learn about AMT chemical pumps and BJM Chemical pumps that you can use for moving chemicals safely.

AMT Chemical Pumps

AMT Solids Handling Centrifugal Chemical Pumps have been designed to handle continuous-duty OEM, General service, and industrial/commercial applications, including cooling, liquid transfer, chemical processing, and circulation. It has a pull-from-rear design which facilitates easy service without causing any disturbance to the piping. These pumps also come with self-cleaning impellers that, depending on the model, can handle solids of about 3/8″ diameter and prevent clogging. Closely coupled to the Totally Enclosed Fan Cooled (TEFC) motors, these pumps require flooded suction and not self-priming.

Now, let's take a look at some of the models of AMT chemical pumps:

AMT 2ES30C-3P Centrifugal Chemical Pump:

Here are the features and benefits of the AMT 2ES30C-3P Centrifugal Chemical Pump:

• Cast iron construction
• Clog resistant impeller, solids handling
• O-Rings and EPDM/EPR Mechanical Seal
• Discharge port that rotates in 45° Increments
• NPT Sizes from 3/4˝ to 2˝
• 1/2 to 3 HP Dual Cycle
• Working pressure of up to 125 PSI
• Flow of up to 180 GPM
• Head up to 95 ft.
• Multiple NPT drain ports that are ½” in size
• Pull-from-rear design that allows easy servicing without causing disturbance to piping.

AMT 07ES05C-1P Centrifugal Chemical Pump:

Here are the features and benefits of AMT 07ES05C-1P Centrifugal Chemical Pump

• Ethylene propylene/Ethylene Propylene Diene Monomer Rubber Shaft Seal
• Discharge Port Rotates in 45° Increments
• Solids Handling, Clog Resistant Impeller
• 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors
• 3/4" to 2" NPT Sizes
• Working Pressure up to 125 PSI
• Maximum Flow 180 GPM
• Maximum Head 95 Ft. (41 PSI)
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• Multiple 1/2" NPT Drain Ports

BJM RX Series Chemical pumps

BJM RX Series Chemical pumps are the top discharge pumps that are chemical corrosion resistant. Since they are the top discharge pumps, they pass the chemical up and around the motor before they discharge it. This way, they can ensure that low-level liquid applications have better motor cooling. Here are some features of the BJM Chemical pumps:

• Single phase
• Overload protection and class F insulation that ensures its long life
• NPT stainless discharge connection of 2”
• 316 stainless-steel used for constructing the parts that are exposed to the pumped liquids.
• FKM used for elastomers
• Power cord of 33 ft.
• Motor protection by double mechanical seals making it three-seal motor protection. The lower and upper seals are made of silicon carbide and carbon/ceramic, respectively.
• Above the impeller, a lip seal is installed that prevents abrasives from entering the seal chamber like silt, sand, or dirt.
• The Class F motor insulation ensures that the temperature of the motor can be raised to 230°F, which is better than Class A and B insulation.
• The switch automatically resets when the motor cools, and the pump turns back on.
• If the amp draw or temperature raises too high, the automatic switch will turn the motor off.
• All the pumps are tested at the factory for safety and performance.
• It is mainly used as a chemical corrosion resistant

Now, let’s take a look at some of the popular BJM Chemical pumps:

BJM 201386, RX Series, Model RX750SS-115, Chemical Corrosion Resistant Dewatering Pump

The BJM Model RX750SS-115 PUMP RX-Series is a chemical corrosion-resistant top discharge pump.  This pump is a top discharge pump, it passes the liquid up and around the motor before discharging.  This ensures better motor cooling in low-level liquid applications.

Here are some of the features and benefits:

• Chemical Corrosion Resistant Dewatering Pump
• 1 HP
• 115 Volts
• 1 Phase
• 3450 RPM
• 2" NPT Discharge
• 89 GPM Max.
• 49 ft. Max. Head
• Stainless Steel
• 50 ft. Cord

BJM 201387, RX Series, Model RX750SS-230, Chemical Corrosion-Resistant Dewatering Pump

The Model RX750SS-230 pump is a chemical corrosion-resistant top discharge pump.  Being that this pump is a top discharge pump it passes the liquid up and around the motor before discharging.

Here are some of the features and benefits:

• Chemical Corrosion Resistant Dewatering Pump
• 1 HP
• 230 Volts, 1 Phase
• 3450 RPM
• 2" NPT Discharge
• 89 GPM Max.
• 49 ft. Max. Head
• Stainless Steel
• 50 ft. Cord

BJM Pumps products are a part of the comprehensive portfolio of direct in-line and submersible pumps from Industrial Flow Solutions. Their products are ideal for municipal, commercial, and industrial applications.

AMT Pump Company offers more than 1000+ standard model numbers. Every single one of their products is designed and engineered by them. A subsidiary of the Gorman-Rupp Company, AMT manufactures and sells commercial/industrial pumps and accessories from authorized distributors like PumpProducts.com.

PumpProducts.com is a stock distributor that sells major brands to all the addresses in the United States. The team of experts at pumpproducts.com assist you in choosing the apt model based on your requirement. If you plan to buy AMT Chemical Resistant pumps and BJM s Chemical Resistant pumps, visit the website today.